- Wired the AC33 Reader with 4-Strands (4PC) to the Terminal Block, then wired another 4-Strands (12PC) to the AC12.
- Wired the Exit Button with 4-Stands (4PC) to the Terminal Block, then wired 2-Strands (4PC) to the AC12, and another 2-Strands (4PC) to the Power Supply.
- Wired the Magnetic Lock with 1-Strand (4PC) to the Terminal Block then to AC12, 1-Strand (4PC) to the Power Supply. Then wired 1-Strand (4PC) from the Power Supply to the Terminal Block then to AC12.
- Verified power is able to turn on including all devices, battery not connected due to programming prerequisite to the Verkada Command.
|
|
Work Completed |
Technician |
Check-in |
Check-out |
Actual Hrs |
|
|
1 |
- Installed UPS unit, Verkada AC12 Access Panel, and an 8-port terminal block placed inside the UPS unit
- Ran 2 cables to the plenum spaced area, 1 for Exit Button and 1 for the Maglock, 1 is already in place for the AC33 Reader.
- Redesigned wiring diagram on Visio for the new wiring scheme. Instead of the setup being in the Electrical Room, now will be on the Plenum Space above the Copier Room/Hallway.
- Will continue tomorrow at 0900. |
Sean Bacani
|
11/18/2025 10:30 am |
11/18/2025 04:10 pm |
05:40
|
|
|
2 |
- Wired the AC33 Reader with 4-Strands (4PC) to the Terminal Block, then wired another 4-Strands (12PC) to the AC12.
- Wired the Exit Button with 4-Stands (4PC) to the Terminal Block, then wired 2-Strands (4PC) to the AC12, and another 2-Strands (4PC) to the Power Supply.
- Wired the Magnetic Lock with 1-Strand (4PC) to the Terminal Block then to AC12, 1-Strand (4PC) to the Power Supply. Then wired 1-Strand (4PC) from the Power Supply to the Terminal Block then to AC12.
- Verified power is able to turn on including all devices, battery not connected due to programming prerequisite to the Verkada Command. |
Sean Bacani
|
11/19/2025 09:00 am |
11/19/2025 02:20 pm |
05:20
|
